GCR Cable HDMI in a coil Video/data 19+1 CU 28AWG textile shield reinforce

High-speed HDMI cable on a reel in a coil is designed for transmitting video with a resolution of 1080p and higher, including image technologies such as 4K, 3D, and Deep Color, plus an additional, special data transmission channel HDMI Ethernet Channel for connecting devices into a network.

Features:
Support for HDMI 2.0 with Ethernet
Support for 4K resolution
Copper conductor
Multi-layer shielding
Reinforcement. Extra strength
Reliable textile braid
Protection against abrasion and tangling

The conductive cores are made of oxygen-free copper (28AWG), which ensures minimal resistance and excellent solderability. The cable has dense shielding (foil + braid), guaranteeing stable signal transmission without loss even near power wires. Internal reinforcement prevents breakage under tension. Application area – indoor installation.

Technical specifications:
Cable type: HDMI 2.0
Conductor material: oxygen-free copper
Support for 4K/60Hz (up to 10 meters) 1080P (over 10 meters)
HDMI 19+1 construction:

shielded pairs 5*(1/0.32±0.008mm/28AWG with grounding 1/0.254) in foamed polyethylene (FM-PE) insulation

4 conductors (1/0.32±0.008mm/28AWG) in high-density polyethylene (HD-PE) insulation

drain conductor (1/0.32mm)

common shield made of aluminum foil on Mylar

overall wire braid (Al-Mg) 64#B
Wire gauge: 28 AWG
Outer diameter ~ 7.3mm
Sheath type: PVC + outer textile braid

Voltage: 30V
Temperature range
fixed installation: -40… +80 °C non-fixed installation: -15… +60 °C
Permissible bending radius
fixed installation: 6 outer diameters non-fixed installation: 8 outer diameters